Forage Additives
Eco Applicators
-
EcosylerUltra low volume applicator for liquid applicationThis Ultra Low Volume (ULV) system has been developed especially for the application of Ecosyl 100 at 20 ml/t of forage using self-propelled harvesters.
Supplied with a 22 litre tank which has a three-way valve and low level indicator, mounted on a stainless steel frame, an electronic control box, a positive displacement peristaltic pump in a weatherproof box, a stainless steel nozzle and 10m of braided PVC tubing.
Applying Ecosyl 100 at 20 ml/t through the Ecosyler system has been proven to distribute MTD/1 bacteria throughout the crop with the same accuracy as 1.5 l/t with a standard applicator. It will also be blockage free, as no filters are required. The Ecosyler can be fitted to any self-propelled forage harvester and be used to apply a range of ULV products at 10-50 ml/t of forage. -
EcoflowFor liquid applicationEcoflow is a high output stem pump for use with 200 litre drums (not supplied). It’s ideal for self-propelled or trailed harvesters and forage wagons. The Ecoflow S and Ecoflow FW both have a maximum output or 10 l/min (open flow*). They come complete with fully variable in-cab controls, a flow meter, single brass nozzle body and a set of jets.
The Ecoflow FW also has a solenoid valve available as an optional extra to prevent siphoning when mounted high on a forage wagon. Ecoflow applicators can be used with organic acid additives.*open flow - no tubing or nozzles
-
EcoDryFor dry applicationThe EcoDry is an 80kg capacity applicator with a rotor delivery system and fully variable in-cab controls. The applicator can be adjusted to give a wide output range (e.g 200 to 3100 g/min for Ecosyl 100).
There are two options for delivery. The RL80 has a single wide-bore delivery tube attached to the base of the unit via a swivel joint, which allows more flexible positioning of the hopper. It comes with a tubing adaptor for delivery direct into the chopping box or air intake.
Alternatively, the 80G delivers over the pickup via three narrower tubes. The two basic models are inter-changeable using a simple kit. -
MiniflowFor liquid applicationThe Miniflow is a reliable, low output, submersible pump suitable for 200 litre drums or 25 litre cans (drum/can is not supplied). Maximum output is 3 l/min (open flow*). It is supplied with fully variable in-cab controls, wiring, tubing, two nozzles and a set of jets.
The Miniflow S is for standard round balers or trailed harvesters and comes with two nozzles. The Miniflow MB is for haulage mini balers and comes with one nozzle.*open flow - no tubing or nozzles
-
EcobalerFor liquid applicationEcobaler is ideal for balers, but can also be used with forage harvesters or forage wagons. Maximum output 8 l/min (open flow*). Supplied with a 250 litre tank, fully variable in-cab controls, pressure gauge, two nozzles, wiring, tubing and a set of jets.
The tank is mounted in a strong cradle, offering many options for fitting. For example: at the front of tractor or forage wagon, on the platform of self-propelled harvester or directly on a baler.
On a forage harvester, a single jet can be used to spray into the chute or chopping box. Alternatively, two or three nozzles can be mounted over the pick-up reel of a harvester, baler or forage wagon to cover the full width. Please note: this applicator is not suitable for use with acid-based additives.
*open flow - no tubing or nozzles -
MagnumFor liquid applicationThe Magnum is similar to the Ecobaler applicator but with a larger 400 litre capacity tank and higher output pump (maximum 19 l/min open flow*). It is ideal for use with high-throughput self-propelled harvesters, big square balers and forage wagons.
*open flow – no tubing or nozzles